A Frame Chairs - New Treated Pine
A clever solid chair design with its A Frame legs to complement any of our Treated Pine A frame picnic tables.
The seat is generous 400mm wide and 300mm deep. The angled back rest is 290mm wide and to an overall height of 850mm. These can be scattered around the garden, placed at the ends of existing picnic tables or you could consider buying a conventional picnic table and replace the bench seats with chairs!
As with all out furniture they are solid yet movable. These are not thin boards or slats, the legs are made from 140x 45mm thick treated pine and the back and seats are made from 290x45mm thick treated pine. This is all held together with fully galvanised batten screws to ensure that are as tough as can be.
These picnic table chairs are not confined to the conventional picnic table and can be moved around the back yard or patio area. The can easily be stacked away and being made from treated pine these outdoor picnic table chairs will last for ages in the open.
Specifications : The seat area is 420mm wide x 300mm deep. The seat height is 440mm to match pour wooden picnic tables and the top of the seat back rest is 850mm from ground (but can be reduced if required)
If you are buying one of our conventional picnic tables, then you may also consider buying just a table without the benches and have these movable picnic table chairs as an alternative.
On our larger picnic tables you could easily add 2 chairs on each end to significantly increase the seating capacity
NOTE: this product can also be custom made with different overall size, different slat sizes and different hardwood timber types including Ironbark, Greygum, Redgum, Victorian Ash, Tasmanian Oak and Merbau
Dimensions: 400W x 300D x 850H (mm)
(CODE: TBLTVJNCHA116 )